In Stock
This multifunctional water-based cleaning machine is mainly designed for surface cleaning of SMT mesh boards, scrapers, PCBs, PCBA boards, and other surfaces in the electronics industry. It uses the most advanced cleaning process in the industry to achieve 100% cleanliness and environmental protection.
The machine consists of a cleaning system, a rinsing system, a drying system, and a filtration system. The machine uses electricity and compressed air as energy sources to manually place the mesh (workpiece) into the cleaning room. After setting the cleaning, rinsing, drying, and other related parameters on the touch screen, press the start button,
and the mesh will be automatically cleaned, rinsed, and dried. After the set cleaning process is completed, it will automatically stop running and reset to achieve the next workflow. This machine is very convenient for operators to clean the mesh board, and the chief mate improves production efficiency and quality. It belongs to a new type of high performance fully automatic cleaning equipment. The equipment uses water-based liquid cleaning agents and DI water for rinsing, with no safety hazards and no harm to personnel.
Main technical specifications and parameters:
| Applicable steel mesh size | L750 x W750 x H40(mm) [Oversized size needs to be customized] |
| Equipment Dimensions | L1600*W1400*H1850 (mm) |
| Screen quantity: | 2sheets |
| Maximum volume of liquid tank | 42L*4PCS |
| Cleaning and rinsing method | Left and right mobile high pressure liquid spray cleaning |
| drying method | High-pressure hot air wind cutter (super strong model is optional) |
| Cleaning solution isolation time | 40~60S |
| cleaning time | 2-5min |
| rinse time | 2-5min |
| drying time | 2-5min |
| Cleaning liquid recovery filtration | 1μm (Filter particles: solder paste, rosin, red glue and pollutants) |
| Rinse Liquid Drain Filtration | 5μm (Filter particles: solder paste, rosin, red glue and pollutants) |
| liquid heating temperature | Room temperature~60°C |
| 10um | (filter impurities andl abels) |
| 5um | (filter small particles and solder paste) |
| 1um | (filter small particles and rosin) |
| Resistivity test range | 0~ 18MQ |
| External air source | 0.4~ 0.6 (Mpa) |
| water pressure | 0.2~ 0.3(Mpa) |
| Exhaust port size | Φ 125xH25(mm) |
| power supply | AC380V 50HZ |
| The total power is about | 25KW |
| rated current | 25A |
| Machine net weight | 550Kg |
Equipment characteristics:
screen boards, misprinted boards, PCB/PCBA, and other processes.
needs.
storage, usage and simplification.
and the number of cycle filters.
feedback on the equipment’s operating status.
problem of SMT steel mesh during high-pressure cleaning.
cleaning fluids.
without repeated pollution.
the residual liquid in the pipeline and pump is directly recovered, which can reduce liquid
consumption by 50% liters.
| Weight | 600 kg |
|---|---|
| Dimensions | 160 × 140 × 185 cm |
© 2001 R.Q.S Elettro All Right Reserve
Reviews
There are no reviews yet.