In Stock
1.PCBA flux cleaning equipment for small and medium production capacity.
2.Typical batch cleaning process, R-800 realizes the whole process of cleaning, rinsing and drying in one cleaning chamber.
3.Improve the cleaning quality to meet the cleaning requirements of various PCBA models, and use the most advanced cleaning technology in the industry to achieve 100% cleanliness and environmental protection.
4.The machine is composed of cleaning system, rinsing system, drying system and filtering system.
5.The machine uses electricity and gas as energy sources, and manually puts PCBA into the cleaning room. After setting the cleaning, rinsing, drying and other related parameters on the touch screen, click to start the operation, and the PCBA will be automatically cleaned, rinsed and dried.
6.When the set cleaning process is over, it will automatically stop running and reset to realize the next working process.
7.This machine is very convenient for workers to clean PCBA, and can help improve production efficiency and quality. It is a new type of high-performance fully automatic cleaning equipment.
8.The equipment uses water-based liquid or DI water as cleaning agent, without any safety hazard, and it is safe for personnel.
Equipment parameters:
| Equipment Dimensions: | L1670*W1100*H1850（mm） |
| cleaning lumen size: | L835*W645*H730 (mm) |
| Wash Basket Size: | L835*W645*H730 (mm) 【Double-layer design】 |
| Cleaning fluid tank volume: | 42 L (high) |
| Coarse rinse tank volume: | 40 L (high) |
| Fine rinse tank volume: | 50 L (high) |
| cleaning method: | Spray cleaning – spray initial rinsing – spray fine rinsing – wind shear drying |
| drying method: | High pressure hot air drying |
| cleaning time: | 5-10Min (time adjustable) |
| initial rinsing time; | 1-3Min (time adjustable) |
| fine rinse time: | 2-5Min (time adjustable) |
| drying time: | 8-15Min (time adjustable) |
| Filtration accuracy: | 0.2um 10 inch PP cotton filter element + activated carbon filter + quartz sand filter liquid |
| Resistivity test range: | 0～18MΩ.cm |
| Cleanliness: | Meet IPC-610D level 3 standard |
| Ionic Residue Content: | Not more than 1.56ug(NaCl)/cm² |
| External air source: | 0.4～0.6 (Mpa) |
| power supply: | AC380V 50HZ |
| The total power is about: | 33KW |
| equipment weight: | 500KG |
Capacity Analysis:
◆ Both the outer door and the inner door on the front of the machine are made of transparent toughened glass, which is convenient for the staff to observe the spraying process inside the machine. With the rubber edge design, the sealing performance is good. It is convenient to clean the deposits in the liquid tank, and can effectively reduce the pollution of the environment caused by gas and liquid overflow.
◆ The transparent liquid level window and liquid level sign of the cleaning liquid tank are convenient for operators to observe the liquid level and water quality changes at any time.
◆ The machine is made of high-quality SUS304 material, which has strong corrosion resistance and good temperature resistance.
◆ The hot air drying adopts low-noise, large-volume vortex fan, combined with the heating of the heat pipe, which not only greatly improves the drying effect.
◆ All door panels of the machine are equipped with sound insulation cotton to reduce fan noise and improve the working environment.
◆ The liquid tank is designed with a liquid level sensor to protect the machine from working under normal liquid level and prevent abnormal liquid level.
◆ The bottom of the spray chamber adopts an inclined design, so that the liquid in the chamber can be completely drained, and it is more convenient to clean and maintain it.
| 重量 | 500 公斤 |
|---|---|
| 尺寸 | 167 × 110 × 185 厘米 |
© 2001 R.Q.S Elettro All Right Reserve
评价
目前还没有评价